■HIT320XL is an equipment that punch all sorts of FPCB surface, and it ensures the safety of workers by eliminating the risk of CS PRESS. ■This equipment uses high-performance, large capacity servo motor to generate accurate punching and high punching power, so it has a good effect on the quality of the product. ■Stable performance and easy operation are possible using PLC control and touch panel. ■This equipment ensures the safety of the workers using two hand start safety button, safety sensor, safety door, safety curtain, etc. ■Mold moving table is a driving method using a servo motor. |
|
HIT320XL | Product parameters |
Stamping products: FPCB, coverlay, SMT appearance stamping | |
Punching distance: can be customized | |
Die type: piercing type / knock out | |
Safety sensor: install safety sensor and safety grating | |
Stamping method: continuous automatic stamping | |
Upper die fixing mode: automatic oil pressure fixing QDC applicable (option) | |
Maximum mounting die size: 580mm x 400mm x 44T | |
Mold movement mode: servo motor movement / distance, speed can be adjusted | |
Mold moving speed: within Max 1000mm / sec, customizable | |
Punch stroke: the maximum can be set to 70mm | |
Stamping speed: can be set within 10 ~ 200mm / sec | |
Servo motor consumption / ball screen: three-phase 380V 50 / 60Hz 7.5kw/ | |
fifty Φ Ball screen 2 | |
Production cycle: 1.8sec ~ 2.0sec (stamping stroke 40mm) | |
Stamping waste: the lower part of the die is discharged automatically | |
Equipment programming mode: PLC & touch screen | |
Stamping pressure: 15 ton | |
Power supply: three-phase 380V | |
Air supply: 5 ~ 6kg / ㎠ |
HIT320XL | Product parameters |
Stamping products: FPCB, coverlay, SMT appearance stamping | |
Punching distance: can be customized | |
Die type: piercing type / knock out | |
Safety sensor: install safety sensor and safety grating | |
Stamping method: continuous automatic stamping | |
Upper die fixing mode: automatic oil pressure fixing QDC applicable (option) | |
Maximum mounting die size: 580mm x 400mm x 44T | |
Mold movement mode: servo motor movement / distance, speed can be adjusted | |
Mold moving speed: within Max 1000mm / sec, customizable | |
Punch stroke: the maximum can be set to 70mm | |
Stamping speed: can be set within 10 ~ 200mm / sec | |
Servo motor consumption / ball screen: three-phase 380V 50 / 60Hz 7.5kw/ | |
fifty Φ Ball screen 2 | |
Production cycle: 1.8sec ~ 2.0sec (stamping stroke 40mm) | |
Stamping waste: the lower part of the die is discharged automatically | |
Equipment programming mode: PLC & touch screen | |
Stamping pressure: 15 ton | |
Power supply: three-phase 380V | |
Air supply: 5 ~ 6kg / ㎠ |
position ：
